Thursday, August 25, 2011

Laying out Mono-Rail track lighting and transformers (Guest bedroom)



REMOTECNPY-SC-2C is the flexible connector with 2 circuits that can mount to the wall to feed  the two 300 watt tracks.


Remote Transformer
All Monorail lighting systems require a transformer to convert standard
120 or 277 voltage to a safe-to-touch 12 or 24 volts.
All Remote Transformers are encased in metal housings complete with
mounting feet and conduit knockouts. Typically, you would use a remote
transformer when a cleaner installation appearance is desired. A remote
transformer must be installed in an accessible remote location, the bulkier
ceiling mounted surface transformer is replaced by a power feed canopy
with flexible coaxial power feed cable or direct feed connector.


Remote Transformer 12/600 Magnetic is the shoe box sized trans former that will be mounted lower on the wall in the corrner and can be painted to match the room.


OR

Surface Mounted Transformer 12/600 Magnetic can be mounted on the wall below the crown molding to feed the track.


Surface Transformer

All Monorail lighting systems require a transformer to convert
standard 120 or 277 voltage to a safe-to-touch 12 or 24 volts.
All Surface Mounted Transformers are encased in a finished
metal housing and mount to a standard 4" junction box with
round plaster ring.
Typically, you use a surface transformer when an accessible
location above the ceiling or in a utility closet is unavailable for
installing a remote transformer. Flexible coaxial feeder cleanly and
attractively sends power to your system. 36" length is standard
for our coaxial feeder. It is easily shortened in the field. Consult
factory for longer lengths.
All dual-feed rail connections are separated by an isolating
connector (ISOCONNECTORCL-M included)


Enhanced by Zemanta

No comments:

Post a Comment